To make the setting up of Wavestore Vision IP cameras quick and simple we have an IP Installer tool. This can be used to discover cameras on the network and make some initial setting changes.
Use the link below to download the IP Installer and then install it on a PC which has network access to the cameras being set up. Please refer to the User’s Manual for the camera for more details.
All the information you might need about Wavestore Vision cameras, including datasheets, quick start guides, installation guides, user manuals and camera firmware can be downloaded here.
If you would like to download a previous version of our software please select which major version you need and download from the table below.
If you are viewing this page in small devices, you may experience some difficulties to see the full table. Please open this page in large devices to get the full experience.
Release date
Client Version No.
32-bit Client
64-bit Client
Server Version No.
Server ISO
Installation Instructions
Manuals
Release Notes
02/10/2024
6.38.11
N/A
6.38.23
05/08/2024
6.36.17
6.36.19
21/12/2023
6.34.17
6.34.155
05/08/2022
6.32.21
6.32.40
13/12/2021
6.30.15
6.30.28
01/10/2021
6.28.7
6.28.25
01/04/2021
6.26.7
6.26.34
02/12/2020
6.24.8
6.24.65
21/01/2020
6.18.37
6.18.27
10/07/2019
6.16.65
6.16.66
08/04/2019
6.14.92
6.14.61
07/03/2019
6.14.86
6.14.61
13/12/2018
6.12.57
6.12.49
07/09/2018
6.12.49
6.12.44
15/06/2018
6.10.10
6.10.49
30/03/2018
5.58.1
5.58.2
27/01/2018
5.56.9
5.56.7
2017
5.54.30
